Dialed in: Engineering projects hum as students present prototypes to industry sponsors

Company reps watch 12 teams demonstrate automated solutions to their manufacturing challenges
Student Alexander Suelflow demonstrates a push piston that was part of his team’s tilt table design for Viracon.
​Jerry Poling | July 8, 2024

It was the moment of truth for a team of UW-Stout engineering majors. As peers, professors and industry representatives gathered around, they engaged the manufacturing prototype they had created.

In about 10 seconds, their cube-shaped device housing numerous moving parts and about 250 components perfectly achieved what they had been working on for nine months: pneumatically feeding a hinge to the precise spot where Phillips-head drivers moved in to install two screws into a hinge assembly.

To the engineers looking on, it was poetry in motion.

The nVent hinge demo team gathered around their design, included from left Caleb Rathje, Mack Klafter, Gervase Thompson, Evan Zaves and Andrew Hoeft.
The nVent hinge team gathered around their design, from left Caleb Rathje, Mack Klafter, Gervase Thompson, Evan Zaves and Andrew Hoeft. / UW-Stout

The Fryklund Hall lab demonstration was one of 12, preceded by detailed classroom presentations, during the final two weeks of the spring semester Senior Design Experience capstone course. A total of 60 students majoring in manufacturingmechanical and computer and electrical engineering developed solutions for real manufacturing problems while building their skills and confidence as they prepare to begin their careers.

The hinge assembly project was watched closely by its sponsor, nVent, a growing, $3 billion a year global company based in St. Louis Park, Minn., that makes electrical products. Hinges in some nVent products currently are installed by hand. The UW-Stout team proved it can be automated with robotics.

Mack Klafter works on the nVent robotic hinge assembly machine.
Mack Klafter works on the nVent robotic hinge assembly machine. / UW-Stout

“It’s cool to see it finally come to life and have the motion we were hoping for,” said Evan Zaves, from Hortonville, a senior in manufacturing engineering. He added that the team did a “really good job with machining” the parts to one-1,000th of an inch to help their prototype operate smoothly.

Other corporations sponsoring student work included Viracon, Fastenal, DiaSorin, Industrial Heat Transfer, Loos Machine and Automation, St. Croix Tactical Manufacturing and Graco. Several companies sponsored more than one project.

Project challenges, all involving automation of processes, included developing a pressure regulator, adaptive fluid monitor, system to manage machine chips, drill and ream jig, tilt table, material handling cart, mesh shear, part marker for threaded rods and a quality control device for threaded rods.

Students on the nVent hinge assembly team explain their design process during a classroom presentation.
Students on the nVent hinge assembly team explain their design process during a classroom presentation. / UW-Stout

Two Viracon challenges

Viracon, of Owatonna, Minn., sponsored the handling cart and tilt table projects, hoping to automate two steps in its process of manufacturing and shipping industrial glass for large building projects. 

The automatic handling cart rotated so that two sides could be loaded while communicating with a robot on the production line — and theoretically without touching the glass panels. The tilt table used built-in pistons to push 200- to 400-pound boxes onto a cart, which attaches to the table during loading with an electromagnet. Software systems control both prototypes.

The projects could improve production efficiency and worker safety while reducing costs at Viracon. As with many projects, students began their research by visiting Viracon’s production facility to see the current processes.

The tilt table operations are controlled with computer software designed by students.
The tilt table operations are controlled with computer software designed by students. / UW-Stout

From Viracon, Senior Engineering Manager Peter Kuhlman witnessed aspects of both projects that could be incorporated into final design solutions. He especially cited the material handling cart team, which “achieved more than anyone should expect from engineering students.

“I am very impressed by the students, the professors and the program,” he said, citing great communication with the teams and effective development, design and review processes.

“I hope this is the beginning of an ongoing partnership. It’s really a win-win-win; the students get real-world experience, we get a solution to a problem and hopefully this can turn into a pipeline for engineering talent for our company. I hope to sponsor projects every year moving forward and to work with the professors to make sure that we are providing the best possible learning opportunities for the students,” Kuhlman said.

Students, faculty and company representatives watch the tilt table Senior Design Experience demonstration for Viracon in the Fryklund Hall engineering labs.
Students, faculty and company representatives watch the tilt table Senior Design Experience demonstration for Viracon in the Fryklund Hall engineering labs. / UW-Stout

He has invited the professors to tour Viracon’s production facility to help identify new student projects. “I can’t wait to see what comes of this partnership,” he said.

More than 20 ongoing projects

Along with projects completed this spring, others are underway and will finish at the end of the fall semester while new ones also will begin in the fall — more than 20 industry collaborations at any given time.

Sponsoring companies provide full financial support of all needed equipment and materials for the testing of ideas and build of final products or systems. Students had to stay within budgets that ranged from $5,000 to $20,000, although one budget was $110,000 because it used two robots. They also submitted their project documents to the companies.

Assistant Professor Danny Bee, Senior Lecturer Glenn Bushendorf and Instrumentation Coordinator Paul Craig were the project advisers. They worked closely with students in labs and with the industry sponsors.

Students who created a robotic material handling cart: from left Isaac Nachtigal, Jordan Bowe, Carter Smith, Bridgette Allen, Steve Strusz from Viracon, Seth Gunderzik, Hattie Kipke and Peter Kuhlman from Viracon.
The cart team: from left Isaac Nachtigal, Jordan Bowe, Carter Smith, Bridgette Allen, Steve Strusz from Viracon, Seth Gunderzik, Hattie Kipke and Peter Kuhlman from Viracon. / UW-Stout

“The true value of our Senior Design Experience is to allow developing engineers to practice the stage gate-driven design and project build,” said Bee, noting a methodology that includes built-in reviews. “Our students know how to design and build their projects.”

The Senior Design Experience blends all three of the university’s tenets — applied learning and research, business and industry collaboration, and career-focused experiences.

Craig, the new program director for manufacturing engineering, said the experience prepares students for a smooth transition into the workforce. “They begin their careers with a leg up on other engineering graduates because of the extensive laboratory-based instruction, which our polytechnic university is known for,” he said.

Graduates from the mechanical and manufacturing engineering programs in 2022-23 reported 100% employment and an average starting salary of more than $70,000, according to a new university First Destination Report.

UW-Stout’s Robert F. Cervenka School of Engineering also has a program in plastics engineering, as well as a bachelor’s program in engineering technology. A master’s in manufacturing engineering is available on campus or online.

###


STEMM Student Expo highlights first-year to senior projects, collaborations on Dec. 12 Featured Image

STEMM Student Expo highlights first-year to senior projects, collaborations on Dec. 12

Honors Chemistry student teams pair up to develop biodiesel, test toxic chemicals in the lab
Art and Design Senior Show, Game, STEMM Expo invite public to hundreds of student showcases Featured Image

Art and Design Senior Show, Game, STEMM Expo invite public to hundreds of student showcases

Capstone design projects in sustainable travel, consumer health punctuate signature polytechnic events
STEAM Day opens world of career, academic possibilities in UW-Stout’s labs, studios Featured Image

STEAM Day opens world of career, academic possibilities in UW-Stout’s labs, studios

Menomonie High School sophomores have hands-on experiences in workshops across campus